Welcome to the official website of Shandong Giant Chung Machine Tool Co., Ltd.!
Weekly maintenance of machining center
1. Clean the air filter screen of the heat exchanger, the filter screen of the cooling pump and the lubricating oil pump.
2, check whether the tool pull bolt is loose, whether the knife is clean.
3. Check whether the mechanical origin of the three axes is offset.
4. Check whether the tool changing arm of the tool magazine or the rotation of the tool magazine cutter head is smooth.
5. If there is an oil cooler, check the oil of the oil cooler. If it is lower than the scale line, please fill the oil in time. Sq169 series 2#5#10# spindle oil is recommended.
6. Check the set temperature of the oil cooler, it is recommended to set it between 26-28 degrees. The above is the daily maintenance of the machining center. I hope the explanation of this article will be helpful to everyone.
Do you have any questions about our products or after-sales service?
Contact us easily through the following methods:
WhatsApp：8615706325866
Phone:+86-15706325866
Email:Leo@giantchung.com
