Welcome to the official website of Shandong Giant Chung Machine Tool Co., Ltd.!
Machining center processing technology and programming, should pay attention to what
Release Time:
Jan 16,2024
If you really want to say what you need to pay attention to, you can carefully divide each version of each programming software and others can produce a book and a CD to teach. All this should be paid attention to, because even if you draw the wrong place on any line, your products will be different, not to mention mistakes in programming.
If you really want to say what you need to pay attention to, you can carefully divide each version of each programming software and others can produce a book and a CD to teach. All this should be paid attention to, because even if you draw the wrong place on any line, your products will be different, not to mention mistakes in programming.
In our processing center cnc, this line is a delicate job, which requires careful cooperation in drawing, programming and machine adjustment in order to make accurate and beautiful workpieces.
Generally speaking, as far as programming is concerned, I think there are mainly several aspects: the processing time is as short as possible, but within the range of tool tolerance, it is necessary to avoid stepping on the tool and sudden feed (advance and retreat), and consider how to sort the subsequent processes (such as processing curved surfaces, which are not easy to do later) and how to do it to achieve good processing effect and size, etc, there are experts who supplement the technology, first know how to make this part, what to do first, what to do later, how to install the card, the card does not affect the tool processing, there can be no interference, need to know the material and tool material, what kind of workpiece material corresponding to what kind of material tool, so that the processing is stable, there is also the stroke problem of the machine tool, the workpiece is too large to exceed the travel. Under the premise of ensuring that the workpiece is stable and easy to install and process, the optimization should be done in consideration of the processing time.
When processing, first do the parts with low precision and do not affect the precision and appearance of the back. When doing the parts with high precision and appearance requirements, pay attention to interference, tool length, workpiece height, determine the workpiece coordinate system, and give reasonable tool parameters. It should be noted whether the knife will be hit.
Keywords:
Previous Page
Recommended News
Do you have any questions about our products or after-sales service?
Contact us easily through the following methods:
WhatsApp：8615706325866
Phone:+86-15706325866
Email:Leo@giantchung.com
